51 11 055 Removing and installing/replacing support for front bottom bumper panel

Necessary preliminary tasks: 

• Remove front BUMPER PANEL 

Version with ACC: 

Drill out blind rivet (1).

Fig 1: Identifying Blind Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Undo bolts (2) on left and right on cross-member (1).

Tightening torque 51 11 5AZ .

Remove carrier (1).

Fig 2: Identifying Carrier And Crossmember Bolt

Courtesy of BMW OF NORTH AMERICA, INC.