51 47 140 Removing and installing/replacing panel for luggage compartment partition wall

Special tools required: 

• 00 9 317

Necessary preliminary tasks: 

• Remove LUGGAGE COMPARTMENT WHEEL ARCH PANEL ON LEFT .
• Remove RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL .

Version with ski bag: 

Lift out and remove cover (1) with special tool 00 9 317 .

Fig 1: Removing Cover Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out clips (1) and remove trim panel (2).

Installation note: 

If necessary, replace faulty clip (1).

Fig 2: Identifying Trim Panel Clips

Courtesy of BMW OF NORTH AMERICA, INC.