31 10 Front Axle Suspension
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Front axle support to engine support (screw connection, front, middle, rear) | F01/F02/F03/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6)/F18 | M12 | Observe repair instructions. | 100 Nm |
| F25/F26 | M12 | Replace screws. | |||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M10 | Replace screws. | |||
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Thrust zone to front axle support | F01/F02/F04/F06 (without M6)/F07/F10 (without M5)/F11/F12 (without M6)/F13 (without M6) | M8 | Replace screws. | |
| Jointing torque | 15 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F06 M6/F10 M5/F12 M6/F13 M6 | M10 | Replace screws. | |||
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25/F26 | M12 | 110 Nm | |||
| 3AZ | Acoustic strut to front axle support | F01/F02 | M8 | ||
| Jointing torque | 15 Nm | ||||
| Angle of rotation | 90 ° | ||||