33 00... Rear axle: wheel/chassis alignment check must be carried out after the following work

Fig 1: Identifying Toe Arm, Integral Link, Wishbone And Wheel Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

A WHEEL/CHASSIS ALIGNMENT CHECK  must be carried out after the following work:

• Release the following screw connection: 
  • Swinging arm, front/rear, to rear axle support
  • Swinging arm to integral link/wheel carrier
  • Control arm to rear axle support
  • Wishbone to rear axle support/wheel carrier
• Replacement of following parts: 
  1. Rear axle support
  2. Toe arm
  3. Wheel carrier
  4. Integral link
  5. Wishbone
  6. Swinging arm