131010 - Tool AM

WARNING: This page is about a different variant/trim than selected.

NOTE: (Carburetor tool) For removing and installing the CO tamper protections - model series: all, except US and Japan

Consisting of:

1 = 0491228 Puller
NOTE: (Puller, short)
2 = 0491229 Puller
NOTE: (Puller, long)
3 = 0491230 Handle
NOTE: (Pressing-on tool handle) For CO tamper tell-tales
4 = 0491231 Pressing-on tool
NOTE: For CO tamper protections
6 = 0491232 Screw
NOTE: (Screwdriver)
7 = 0491233 Handle
NOTE: (Pressing-on tool handle) For CO tamper tell-tales - engine: M20
8 = 0491234 Pressing-on tool
NOTE: For CO tamper protections - engine: M20

Fig 1: Identifying Tool (131010)
Courtesy of BMW OF NORTH AMERICA, INC.