13 71 150 Removing right clean air pipe (S63)

Necessary preliminary work: 

• Remove right AIR DUCT 

Release screws (1).

Tightening torque 13 71 4AZ .

Unlock and detach engine vent line (2).

Disconnect clean air pipe (3) from exhaust turbocharger and remove.

Fig 1: Identifying Clean Air Pipe, Engine Vent Line And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Renew sealing ring (1) and coat with light film of engine oil.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.