13 90 504 Replacing the right tank vent valve (N63O1)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock connector (1) and remove.

Unlock hose (2) and detach.

Unlock hose (3) on intake plenum and detach.

If necessary, unlock and pull off connector from throttle body.

Feed out and remove tank vent valve.

Fig 1: Identifying Hoses And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Read out the fault memory of the DME control unit.
Delete fault memory.