13 90 500 Replacing right tank vent valve (S63)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock connector (1) and remove.

Unlock hose (2) and detach.

Pull off tank vent valve (3) from holder.

Fig 1: Pulling Tank Vent Valve From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock hose (1) on intake plenum and detach.

Feed out and remove tank vent valve.

Fig 2: Identifying Intake Plenum Hose

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Read out the fault memory of the DME control unit.
Delete fault memory.