61 31 IHKA controls, fan motor
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - IHKA CONTROLS, FAN MOTOR
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ |
IHKA housing rear panel screws |
F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 |
|
|
0.30 Nm |
| 2AZ |
Fan motor screws |
F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 |
|
|
0.20 Nm |