61 35 Control units
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - CONTROL UNITS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Control unit for Car Access System | F01/F02/F03/F04/F06/F12/F13 | 3.3 Nm | ||
| 2AZ | Control unit for camera-based driver support systems (KAFAS) | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | 3.3 Nm | ||
| 3AZ | Central gateway module | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 | 3.3 Nm | ||
| 4AZ | Footwell module | F01/F02/F03/F04/F07/F10/F11 | 3 Nm | ||
| 5AZ | Control unit for Car Access System | F07/F10/F11 | M6 | 4.5 Nm | |
| 6AZ | Battery charger module on body | F06/F12/F13 | M6 | 8 Nm | |
| 7AZ | BDC on holder | F15/F16/F85/F86 | Screw | 1.7 Nm | |
| 8AZ | Interior aerials | F15/F16/F85/F86 | Screw | 1.7 Nm | |