72 14... Removing and installing/replacing top tether eyes for child seat

WARNING: This page is about a different variant/trim than selected.

NOTE: Two or three top tether eyes can be installed depending on the model.

Release screws (1) and remove top tether eyes (2).

Tightening torque 72 11 24AZ .

Fig 1: Identifying Top Tether Eyes And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure top tether eyes (1) are in correct installation position.
It must be possible to fold top tether eyes (1) in direction of head restraints (2).

Fig 2: Identifying Correct Installation Position For Top Tether Eyelets

Courtesy of BMW OF NORTH AMERICA, INC.