SI number

00 02 99 (399)

Fig 1: Identifying Cable Cabinet (000190)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1. 1 = 0494122  Cable cabinet
   NOTE: Without content and without accessories Base for cable cabinet I and II
2. 6 = 0494123  Frame
   NOTE: (Frame) swivel panel frame, support of the cable suspensions in cable cabinets I and II discontinued, available as part of set of special tools only
3. 9 = 0494124  Floor
   NOTE: (Floor) Only for cable cabinet I Deletion, only available via tool set
4. 2 = 0490072  Foil
   NOTE: (Foil set I) For identification of the storage locations in the cable cabinet I - valid status in each case
5. 3 = 0490073  Holder
   NOTE: (Cable holder set - H -) For cable cabinet I only 24 guide rails with 15 holding straps each for accommodating the adapter cables
6. 4 = 0490074  Cable holder
   NOTE: (Cable holder) Cable holder - B - For mounting the engine test cable For extending the cable suspensions in cable cabinet I and II
7. 7 = 0493529  Drawer block
   NOTE: Only for cable cabinet I Deletion, only available via tool set
8. 8 = 0493530  Magnet
   NOTE: (Magnet) Magnet with roller. For better fixation and spacing of the swivel panels - Only for retrofitting in cable cabinets I and II Deletion, only available via tool set
9. 10 = 0493532  Register
   NOTE: For locating the BMW special tools for the vehicle electrical system in cable cabinet I and II