17 11 000 Removing and installing the radiator (N55)

WARNING: This page is about a different variant/trim than selected.

WARNING: Risk of scalding!
Only perform this repair work after engine has cooled down.

IMPORTANT: Wear safety goggles and protective gloves.

Necessary preliminary work:

Release screws (1) on left and right from cover (3).

Tightening torque: 5 Nm

Release screws (2) behind sealing lip.

Tightening torque: 5 Nm

Lift out cover (3).

Fig 1: Identifying Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove radiator (1) towards top.

Fig 2: Removing Radiator

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Check COOLING SYSTEM for leaks.