17 11 000 Removing and installing radiator (N63, N63O1)
WARNING: This page is about a different variant/trim than selected.
WARNING:
Risk of scalding!
Only perform this repair work after engine has cooled down.
Only perform this repair work after engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Remove fan cowl. See REMOVING FAN COWL WITH ELECTRIC FAN (N63) or REMOVING FAN COWL WITH ELECTRIC FAN (N63O1) .
- See DRAINING/ADDING COOLANT (N63) or DRAIN/TOP-UP COOLANT (N63O1) .
- Unlock and detach coolant hoses on radiator.
Release screws (1) on left and right from cover (3).
Tightening torque: 5 Nm
Release screws (2) behind sealing lip.
Tightening torque: 5 Nm
Lift out cover (3).
NOTE:
(Images show N54, procedure identical on N63)
Remove radiator (1) towards top.
NOTE:
(Images show N54, procedure identical on N63)
Reassemble the vehicle.
Visual inspection of cooling system for tightness.