65 50 030 Removing and installing/replacing TV module

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) .

NOTE: Follow notes for HANDLING OPTICAL FIBRES .

Necessary preliminary tasks:

Unlock plug connections (1) and (2) and disconnect.

Release screw (3) and nuts (5).

Remove TV module (4) with brackets.

Fig 1: Identifying TV Module Plug Connections, Screw, And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

For equipment specifications including a Combox:

Release nuts at marked points.

Fig 2: Locating Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove TV module (2).

Fig 3: Identifying TV Module Screws

Courtesy of BMW OF NORTH AMERICA, INC.