65 77 720 Removing and installing (replacing) left B-pillar sensor

WARNING: This page is about a different variant/trim than selected.

WARNING: NOTE AIRBAG SAFETY INSTRUCTIONS !
Incorrect handling can lead to airbag deployment and cause injury.

Necessary preliminary work:

Release screw.

Tightening torque 65 77 3AZ .

Feed out the B-pillar sensor (1) downwards.

Unfasten plug connection (2) and disconnect.

Installation note:

Make sure sensor is mounted without play.

Fig 1: Identifying B-Pillar Sensor Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.