64 11 545 Removing and installing blower housing for heating and air-conditioning unit

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unlock plug connection (1) on automatic air recirculation control sensor (2) and disconnect.

Fig 1: Identifying Automatic Air Recirculation Control Sensor Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on blower housing cover (2).

Lift out blower housing cover.

Fig 2: Identifying Blower Housing Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on fan housing (2).

Unlock plug connections (3) and disconnect.

Carefully feed out fan housing (2).

Fig 3: Identifying Fan Housing Screws And Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.