64 12... Initializing Telestart hand-held transmitter
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Telestart hand-held transmitter must be initialized when:
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 °C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
- Hand-held transmitter is replaced
- Car Access System control unit is replaced
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 °C.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
NOTE:
Initialization can only be carried out with the BMW diagnosis system.
Follow instructions and specifications in procedure.
Service functions:
- Complete vehicle
- Body
- Air conditioning function
- Telestart transmitter
- Initialization