64 12 120 Removing and installing/replacing intake silencer for independent/auxiliary heater
WARNING: This page is about a different variant/trim than selected.
WARNING:
Risk of burning!
Work on auxiliary heater may only be carried out when it has cooled down.
Work on auxiliary heater may only be carried out when it has cooled down.
Necessary preliminary tasks:
- Remove FRONT LEFT WHEEL ARCH TRIM
Loosen the retaining clip (1) and unscrew the silencer (2) from the connecting hose (3) in direction of arrow.
Installation note:
If the retaining clip (1) is damaged, replace the intake silencer (2).