52 17 422 Replacing upholstery for driver's seat backrest (Comfort)

WARNING: This page is about a different variant/trim than selected.

The operation for removing the upholstery is described in:

NOTE: The following operations only apply to optional seat ventilation equipment:

Remove dividing net (1) towards top.

Fig 1: Identifying Dividing Net

Courtesy of BMW OF NORTH AMERICA, INC.

Remove fan (1) towards top.

Installation note:

Make sure fans have correct cable routing (2) (cables point to each other).

Fig 2: Identifying Fan And Correct Cable Routing

Courtesy of BMW OF NORTH AMERICA, INC.