52 16 105 Removing and installing/replacing outer backrest cover

WARNING: This page is about a different variant/trim than selected.

Unclip cover (1) in direction of arrow.

IMPORTANT: Risk of damage!
Cover (1) is secured to backrest frame by a retaining strap.

Fig 1: Unclipping Backrest Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip clamp from backrest frame.

Installation note:

Make sure clamp is correctly seated on backrest frame.

Fig 2: Identifying Retaining Strap

Courtesy of BMW OF NORTH AMERICA, INC.

Pull release handle (1) and feed out cover (2).

Fig 3: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Pre-install metal clamps in trim.

Fig 4: Identifying Metal Clamps

Courtesy of BMW OF NORTH AMERICA, INC.