33 17 Rear axle final drive suspension
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE FINAL DRIVE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential to rear axle carrier, front | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | FOLLOW REPAIR INSTRUCTION . | 100 Nm |
| 2AZ | Rear differential to rear axle carrier, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M14 | OBSERVE INSTRUCTIONS IN REPAIR MANUAL
. Replace nut. |
165 Nm |
| 3AZ | Vibration absorber to screw connection of rear axle differential, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 28 Nm | |
| 4AZ | Vibration absorber to rear axle support, rear | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M8 | 19 Nm | |
| 5AZ | Vibration absorber to rear axle differential | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M12 | Replace screw. | 100 Nm |