11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust camshaft bearing cap to cylinder head | N20/N26 | M6x50 | Insert bolts dry. | 12 Nm |
| 2AZ | Eccentric shaft bearing cap to cylinder head | N20/N26 | M6x27 | 10 Nm | |
| 3AZ | Intake camshaft bearing cap to cylinder head | N20/N26 | M6x30.5 | 10 Nm | |
| 4AZ | Chain drive module to cylinder head | N20/N26 | M6x35 | 10 Nm | |
| 5AZ | Guide rail to crankcase | N20/N26 | M8 | 20 Nm | |
| 6AZ | Guide rail to cylinder head | N20/N26 | M7 | 14 Nm | |
| 7AZ | Chain tensioner to cylinder head | N20/N26 | M22 M22 x 1.5 | Do not retighten the chain tensioner. Replace sealing ring, thread lightly oiled. |
80 Nm |
| 8AZ | Screw plug in cylinder head | N20/N26 | M18x1.5 | 25 Nm | |
| 9AZ | Banjo bolt, oil pipe to cylinder head | N20/N26 | M7x16 | Replace sealing ring. | 10 Nm |