11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | ||||
| Torque angle | 45 ° | ||||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 Nm | ||
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 Nm | ||