64 11 872 Removing and installing/replacing actuator drive for blending flap (right)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove GLOVE BOX
Release screws (3).
Unfasten plug connection (1) and disconnect.
Remove actuator drive (2).
Installation note:
Make sure actuator drive (2) is correctly seated in guide (4).
Servomotors must be readdressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and air conditioning function
- Flap motors
- Readdress flap motors