51 16 145 Removing and installing (replacing) decorative trim at center console

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 327

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Version with instrument panel in leather:

When removing and installing, the decorative strip (1) may damage the leather of the instrument panel.

To avoid damage, the yellow plastic adhesive tape (2) must be placed between the decorative strip (1) and the instrument panel.

Fig 1: Instrument Panel Decorative Strip And Adhesive Tape

G10096954

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen cover (1) with special tool 00 9 327 from clamps (2).

If necessary, unlock associated plug connections and disconnect.

Remove cover (1) upwards.

Fig 2: Loosening Center Console Cover With Special Tool (00 9 327) From Clamps

G10096955

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Replace faulty clamps (1).

Replacement (depending on version):

Remount CONTROLLER (2).

Fig 3: Controller Clamps

G10096956

Courtesy of BMW OF NORTH AMERICA, INC.