LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 846 (Restraints - Repair - F31) >> Gas Generators, Airbag Modules (With Steering Wheel Airbag 3234) >> 72 12 004 Removing and installing/replacing airbag module for driver's knee protection

72 12 004 Removing and installing/replacing airbag module for driver's knee protection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Read and comply with SAFETY REGULATIONS  for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
IMPORTANT: Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system. 

Necessary preliminary tasks: 

Unfasten plug connection (1) AND DISCONNECT .

Unfasten screws (2).

Tightening torque 72 12 02AZ .

Fig 1: Identifying Plug Connection And Screws
G10099239Courtesy of BMW OF NORTH AMERICA, INC.