11 12 040 Removing and installing all ignition coils and injector wells (N20, N26)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove CYLINDER HEAD COVER .
- Remove all INJECTORS .
Release screws (1).
Tightening torque: 11 12 6AZ .
Remove injector slot (2).
Check fitting bushes (1) for damage.
Installation note:
Replace gasket (2).
Assemble engine.