24 30 Hydraulic/electric control parts and controlling elements
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Valve body to transmission | GA6HP19TU/GA6HP26TU | M6 | 8 Nm | |
| 2AZ | Valve housing to valve body | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 5 Nm | |
| 3AZ | Input- and output-speed sensors to mechatronics | M6 | 12 Nm | ||
| 4AZ | Mechatronics to transmission | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z/GA8HP90Z/GA8P70H | M6x59, M6x20 | Replace screws | 8 Nm |
| 5AZ | Oil volume accumulator to transmission | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z | M6x59, M6x20 | Replace screws | 8 Nm |
| 6AZ | Centering plate to transmission bell housing | GA8HP45Z/GA8HP50Z/GA8HP70Z/GA8HP75Z/GA8HP90Z | M8X74 | Jointing torque | 10 Nm |
| Angle of rotation | 90 ° | ||||
| 7AZ | Speed sensor to transmission | GA8HP50Z/GA8HP75Z | M6X20 | Replace screws | |
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 12 ° | ||||