72 12 004 Removing and installing/replacing airbag module for driver's knee protection (only US version and Korean version from 07/2013)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Operations on pyrotechnical devices may only be carried out by authorized experts.
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system .
Improper, unauthorized operations may result in serious dangers.
Unauthorized persons are strictly prohibited from performing any operations on this system .
Airbag module for driver's knee protection is only installed in following national-market versions:
- US version
- European version for Korea (only F10 from 07/2013)
Necessary preliminary tasks:
- Remove trim panel for pedal mechanism
Release screws (1).
Tightening torque 72 12 03AZ .
Feed airbag module (2) in direction of arrow out of instrument panel trim and remove.
Installation note:
Make sure airbag module (1) is correctly seated in instrument panel trim.