25 11 250 Removing And Installing/Replacing Vibration Absorber
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2016 BMW M5, 2016 BMW 535i, 2015 BMW M5, 2015 BMW 535i, and 2014 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work:
- Remove GEARSHIFT LEVER KNOB .
Open clamp (1) on vibration absorber with pliers.
Unlock vibration absorber with screwdriver (2) (there is a locking detent on one side only).
Lift out vibration absorber.
Installation note:
With new vibration absorber, after connecting on gearshift lever, retaining clip unlocked.
Make sure the vibration absorber is correctly engaged in the gearshift lever.