LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 822 (Pedals - Repair) >> Accelerator Pedal Actuation >> 35 40 001 Removing and installing or replacing accelerator pedal module

35 40 001 Removing and installing or replacing accelerator pedal module

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Take off cap.

Release screw.

Pull accelerator pedal module upwards out of fixture.

Installation note: 

Tightening torque 35 40 1AZ .

Fig 1: Pulling Accelerator Pedal Module Upwards Out Of Fixture
G04726718Courtesy of BMW OF NORTH AMERICA, INC.

Pull off connector (1).

Remove accelerator pedal module.

Fig 2: Identifying Accelerator Pedal Module Connector
G06894916Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Accelerator pedal module can only be replaced completely with adapter plate.
scientia non olet · About LEMON Manuals