52 13 040 Removing and installing/replacing outer cover on left or right front seat

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Move seat fully forwards and upwards.

Pull lever forward to remove:

If necessary, lever out lower locking point (1) from rear with a screwdriver.

Release screw (2).

Fig 1: Releasing Screw

G09927234

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim:

Unclip at top edge
Unclip at rear towards top side
Pull on belt opening
Unlock lugs
Carefully remove trim towards front

Unfasten plug connection.

Replacement only:

Remove switch . See 61 31 204 REPLACING OPERATING UNIT FOR SEAT ADJUSTMENT or 61 31 208 REMOVING AND INSTALLING/REPLACING SWITCH FOR FRONT LUMBAR SUPPORT .

Fig 2: Removing Rear Towards Top Side

G09927235

Courtesy of BMW OF NORTH AMERICA, INC.

Depending on version, cut-outs for buttons in cover may need to be reworked.

Installation note:

Retaining clips and tabs must not be damaged.

Fig 3: Identifying Retaining Clips And Tabs

G09927236

Courtesy of BMW OF NORTH AMERICA, INC.