51 24 326 Removing And Installing/Replacing Right Tension Spring With Damper For Tailgate

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NECESSARY PRELIMINARY WORK:

REMOVE RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL .

WARNING: SUPPORT TAILGATE IN FULLY OPENED POSITION WITH SUITABLE APPARATUS. DANGER OF INJURY!

PRESS CLAMP (1) TOGETHER.

BALL SOCKET (2) JUMPS OUT OF BALL STUD.

WARNING: THE TAILGATE WILL DROP DOWN IF IT IS NOT SUPPORTED.

INSTALLATION NOTE:

TENSION SPRING MUST NOT BE TWISTED WHEN CLIPPING IN BALL SOCKET (2).

THIS CAN LEAD TO TENSION CAUSING THE BALL SOCKET TO COME LOOSE FROM THE BALL STUD.

Fig 1: PRESSING CLAMP

Courtesy of BMW OF NORTH AMERICA, INC.

UNHOOK TENSION SPRING WITH DAMPER (1) FROM TAILGATE HINGE (2).

Fig 2: REMOVING TENSION SPRING WITH DAMPER FROM TAILGATE HINGE

Courtesy of BMW OF NORTH AMERICA, INC.