41 61 060 Removing And Installing/Replacing Left Hinge For Engine Compartment Lid (Vehicles From 09/2011)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Support engine compartment lid in fully opened position with suitable apparatus. Risk of injury.

IMPORTANT: Observe separate procedure for vehicles with ACTIVE PEDESTRIAN PROTECTION .

Necessary preliminary work:

Remove GAS PROP for engine compartment lid

Position suitable cloth under engine compartment lid without gaps.

Fig 1: Positioning Suitable Cloth Under Engine Compartment Lid Without Gaps

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: After screws have been slackened no lateral forces must be exerted on the engine compartment lid!
Secure engine compartment lid with a second person.

Release screws (1).

Tightening torque 41 61 1AZ .

Fig 2: Identifying Engine Compartment Lid With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove hinge.

Tightening torque 41 61 3AZ .

Installation note:

ADJUST hinge together with engine compartment lid.

Fig 3: Identifying Hinge With Screws

Courtesy of BMW OF NORTH AMERICA, INC.