22 11 011 Replacing left engine mount (N55)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Secure engine in installation position . See 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N55) or 11 00 670 SECURING ENGINE IN INSTALLATION POSITION (N55, N52T, N53)
Remove rear UNDERBODY PROTECTION
Release ENGINE SUPPORT ARM

Release screws (1) and remove engine mount.

Tightening torque 22 11 1AZ .

Fig 1: Identifying Left Engine Mount Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Rubber section (1) of engine mount must point to middle of vehicle.

Fig 2: Identifying Rubber Section Of Engine Mount

Courtesy of BMW OF NORTH AMERICA, INC.