36 12 084 Replacing sealant bottle of M-Mobility system
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This work step describes how the sealant bottle is replaced within the framework of inspection (M-Mobility system not used).
If the M-Mobility system has been used, also replace the transparent tire inflation hose.
If the M-Mobility system has been used, also replace the transparent tire inflation hose.
Remove seal film (1). Not necessary if M-Mobility system has already been used.
Installation:
Replace seal film.
Release Torx threaded bolts (1) and raise cover as far as possible.
Installation:
Release hexagon nut (1), grip nut firmly from underside.
Installation:
Lift sealant bottle out.
Ensure that hose is laid without any kinks.
NOTE:
Note the expiration date when installing a new sealant bottle.