LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 808 (Engine Electrical System - Repair) >> Alternator With Drive And Mounting >> 12 31 020 Removing and installing or replacing alternator (S63 B44 T 0)

12 31 020 Removing and installing or replacing alternator (S63 B44 T 0)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

IMPORTANT: Risk of damage!
Cover radiator.

Unclip all cables (1) and coolant lines from brackets.

Fig 1: Identifying Coolant Lines And Cables
G09914188Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Place auxiliary water pump to one side.

Unfasten screws (2).

Tightening torque 12 31 1AZ .

Put cable clip aside.

Feed out alternator and remove.

Fig 2: Identifying Auxiliary Water Pump Screws
G09914189Courtesy of BMW OF NORTH AMERICA, INC.
NOTE: Check stored fault message.
Reassemble the vehicle.
Delete fault memory.