64 11 943 Replacing evaporator temperature sensor

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM PANEL FOR PEDAL ASSEMBLY .

NOTE: For purposes of clarity, picture shows heating and air-conditioning unit removed.

Disconnect plug connection (1) from evaporator temperature sensor.

Pull evaporator temperature sensor with flat-nose pliers out of heating and air-conditioning unit housing (2).

Fig 1: Identifying Air-Conditioning Unit Housing And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.