LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 807 (Heating And Air Conditioning - Repair) >> Heater With Operation >> 64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh air grille)

64 11 906 Removing and installing/renewing ventilation temperature sensor (center fresh air grille)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Turn temperature sensor (2) on plug socket in direction of arrow up to limit position.

Remove temperature sensor (2) from center fresh air grille (3).

Installation note: 

Pay attention to lead sequence.

Make sure temperature sensor (2) is correctly engaged in middle fresh air grille (3).

Fig 1: Removing Temperature Sensor From Center Fresh Air Grille
G06886163Courtesy of BMW OF NORTH AMERICA, INC.