61 31 338 Removing and installing/replacing grip cover for gear selector switch (ceramic application, operating elements)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 322

Carefully unclip knob cover (1) 00 9 322 with special tool at points (2) from gear selector switch (3) and remove in direction of arrow.

Fig 1: Removing Gear Selector Switch Using Special Tool (00 9 322)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove support (2).

Tightening torque 61 31 4AZ .

Fig 2: Identifying Support And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Removed ceramic carrier (2) must not be reused.

Installation note:

Engagement lugs (1) of ceramic carrier (2) must not be damaged.

Fig 3: Identifying Engagement Lugs And Ceramic Carrier

Courtesy of BMW OF NORTH AMERICA, INC.