61 31 310 Replacing brake light switch
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove trim panel for pedal mechanism . See 51 45 184 REMOVING AND INSTALLING (REPLACING) TRIM PANEL FOR PEDAL MECHANISM (ECE ONLY) or 51 45 184 REMOVING AND INSTALLING (REPLACING) TRIM PANEL FOR PEDAL MECHANISM (US ONLY) .
Disconnect plug connection (1).
Pull brake light switch (2) in direction of arrow out of brake light switch holder (4).
Installation note:
- Press brake pedal (3) to floor.
- Push brake light switch (2) as far as it will go into brake light switch holder (4).
- Counter hold brake light switch (4) holder, slowly return brake pedal (3) to initial position and tighten to stop.
NOTE:
Removing brake light switch holder (1):
Press brake pedal.
Unclip brake light switch holder (1) at shanks (2) and remove towards rear.