61 14 010 Removing and installing/renewing power distribution box (on battery)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Observe SAFETY INFORMATION for handling vehicle battery.

Necessary preliminary tasks:

Disconnect BATTERY NEGATIVE CABLE

Fold up covers (1). Unscrew nuts (2).

Tightening torque 61 21 2AZ .

Unscrew nut (3).

Tightening torque 61 21 3AZ .

Disconnect plug connection (4).

Fig 1: Identifying Plug Connection And Covers

Courtesy of BMW OF NORTH AMERICA, INC.

Press locking brackets (1) downwards and unclip in direction of arrow.

If necessary, using a screwdriver, expand locking bracket (1) at lower end and clip out.

Remove power distribution box (2) towards top.

Fig 2: Removing Power Distribution Box Towards Top

Courtesy of BMW OF NORTH AMERICA, INC.