LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 805 (General Electrical System - Repair) >> Control Units, Modules, Sensors, Aerials >> 61 35 980 Removing and installing/renewing aerial for comfort access system on left or right

61 35 980 Removing and installing/renewing aerial for comfort access system on left or right

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Disconnect plug connection (1).

Unlock and remove aerial for comfort access system (2) from bracket (3).

Installation note: 

Make sure interior aerial for comfort access system (2) is correctly seated in designated holder (3).

Fig 1: Identifying Comfort Access System And Plug Connection
G06895105Courtesy of BMW OF NORTH AMERICA, INC.