LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 804 (Body Equipment - Repair) >> Trunk Latch, Locks >> 51 24 130 Removing and installing/replacing striker for tailgate lock

51 24 130 Removing and installing/replacing striker for tailgate lock

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unfasten screws (2).

Tightening torque 51 24 3AZ .

Remove striker (1) for rear lid lock.

Installation note: 

Adjust REAR LID LOCK .

Fig 1: Identifying Rear Lid Lock Striker And Screws
G09926138Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Striker and tailgate lock must not be greased.