LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 804 (Body Equipment - Repair) >> Gaskets/Seals, Loose Body Components >> 51 71 041 Removing and installing/replacing rear left or right wheel arch cover

51 71 041 Removing and installing/replacing rear left or right wheel arch cover

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work: 

Release all marked screws (arrows).

Release screws (3).

Unscrew nuts (2).

Carefully feed out rear wheel arch cover (1) towards bottom.

Installation note: 

Ensure wheel arch cover (1) is correctly seated.

Make sure all screws are installed in correct position.

Screws (3) are longer than remaining screws.

Fig 1: Locating Wheel Arch Cover Screws
G06886010Courtesy of BMW OF NORTH AMERICA, INC.