34 32 Brake Lines
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - BRAKE LINES
| Type | Thread | Tightening specifications | Value | ||
|---|---|---|---|---|---|
| 1AZ | Brake line screws/retaining screws | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 x 1 | 14 Nm | |
| F01/F02/F03/F04/F06/F07/F10/F11/F13/F12/F18/F25/F26 | M12 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F11/F10/F12/F13/F18/F25/F26 | M12 x 1 | Blue union screw connection in aluminum e.g. hydraulic control unit | 17 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 x 1 | 14 Nm | |||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in steel e.g. brake hose | 16 Nm | ||
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 x 1 | Blue union screw connection in aluminum e.g. hydraulic control unit | 17 Nm | ||
| 2AZ | Brake hose to brake caliper, front | F01/F02/F03/F04/F03/F06/F07/F10/F11/F12/F13/F18/F25/F26 | Cap screw | 17 Nm | |
| 3AZ | Brake hose to brake caliper, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | 24 Nm | ||
| F10/F12/F13/M5/M6 | M10x1 | Banjo bolt (renew seals) | 40 Nm | ||