33 17 Rear axle differential mountings
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE DIFFERENTIAL MOUNTINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential to rear axle carrier, front | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Follow repair instruction. Refer to 33 10 010 REMOVING AND INSTALLING/REPLACING REAR DIFFERENTIAL . | |
| Replace screws. | |||||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25/F26 | M12 | Follow repair instruction. | 100 Nm | ||
| 2AZ | Rear differential to rear axle carrier, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Follow repair instruction. Refer to 33 10 010 REMOVING AND INSTALLING/REPLACING REAR DIFFERENTIAL
. Replace nut. |
175 Nm |
| F25/F26 | M14 | Follow repair instruction. Replace nut. |
165 Nm | ||
| 3AZ | Vibration absorber on front right rear axle final drive | F10/F11 | M12 | Replace nut. | 56 Nm |
| 4AZ | Vibration absorber to vibration absorber holder | F25/F26 | M14 | 100 Nm | |
| 5AZ | Front adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace screws. | 120 Nm |
| 6AZ | Rear adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | 120 Nm | |