33 55 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bracket, anti-roll bar to rear axle support | F01/F02/F03/F04/F07/F06/F10/F11/F12/F13/F18 | M10 | Replace screws. | 56 Nm |
| F25/F26 | M8 | Replace screw. | 34 Nm | ||
| 2AZ | Anti-roll bar link to anti-roll bar/swinging arm | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M10 | Replace nuts. | 56 Nm |
| F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |||
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Vibration absorber to anti-roll bar bracket | F01/F02/F06/F07/F10/F11/F12 | Replace screw. | 19 Nm | |
| 4AZ | Anti-roll bar link to wheel carrier | F25/F26 | M10 | Replace screw. | 56 Nm |