31 35 Anti-roll bar
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Retaining bar for stabilizer to front axle carrier/steering gear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screw. | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 105 ° | ||||
| F03 | M12 | Replace screw. | |||
| Jointing torque | 100 Nm | ||||
| F03 | M14 | Replace screw. | |||
| Jointing torque | 165 Nm | ||||
| F25/F26 | M10 | 56 Nm | |||
| 2AZ | Stabilizer link to stabilizer/damper | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace nuts. | |
| Jointing torque | 45 Nm | ||||
| Angle of rotation | 45° | ||||
| 3AZ | Anti-roll bar link to anti-roll bar | F25/F26 | M12 | Replace nut. | 100 Nm |
| 4AZ | Anti-roll bar link to damper | F25/F26 | M12 | Replace nut. | 108 Nm |